XPR9TS & XPR9DTS - 4000 Kg

2 POST FLOORPLATE LIFT - Narrow or Wide Versions available. XPR9TS: Chain Drive - XPR9DTS: Direct Drive Cylinders.
Manufacturer: BendPak

2 POST FLOORPLATE LIFT


Narrow or Wide Versions Available

 

Features:

  • 4000 Kg Lifting Capacity
  • Triple reach telescoping front and rear arms
  • Screw Pad Adapter comes as standard
  • 4-piece 63 mm stackable adapter set comes standard
  • Power unit on either side
  • CE Approved and Certified - ETL approved
  • Single-piece columns
  • Shorter column for low-ceiling installations
  • Adjust able wide or narrow drive-thru configurations
  • Extended rise gives you over 6-feet of under clearance
  • Single-piece columns
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Electric / hydraulic power system
  • Large 510mm x 480mm steel base plates
  • Self-lubricating dura-glide polyethylene bearing system
  • Safety locks in each column spaced every 76mm
  • Automatic arm restraints
  • Heavy-duty dual 9.5mm equalizer cables with oversize cable sheaves
  • XPR9TS - Chain lifting system combined with dual hydraulic cylinders
  • XPR9DTS – Direct drive cylinders

Comprehensive 3 year motor / hydraulics warranty and 5 year structural warranty

Model XPR9TS XPR9DTS
Lifting Capacity (Kg) 4082 4082
Front/Rear Axle Capacity (Kg) 2041 2041
A. Height Overall (mm) 2870 3683
B. Width Overall (NARROW) (mm) 3353 3353
B. Width Overall (WIDE) (mm) 3683  3683 
C. Width Outside Columns (NARROW) (mm) 3225 3225
C. Width Outside Columns (WIDE) (mm) 3555 3555
D. Floor Pan Height (mm) 44  44
E. Inside Columns (NARROW) (mm) 2667 2667
E. Inside Columns (WIDE) (mm) 2997 2997
F. Reach (Front Arm Min.) (mm) 698 698 
G. Reach (Front Arm Max.) (mm) 1308 1308 
H. Reach (Rear Arm Min.) (mm) 698 698
I. Reach (Rear Arm Max.) (mm) 1308 1308
J. Min Pad Height (mm) 102 102
K. Rise (mm) 1753 1753
L. Max Lifting Height (Pad Only) (mm) 1854-1905 1854-1905
M. Max Lifting Height (3" adapter) (mm) 1917-1969 1917-1968
N. Drive Through Clearance (NARROW) (mm) 2362 2362
N. Drive Through Clearance (WIDE) (mm) 2692 2692
Screw Pad Adjustment (mm) 51 51
Motor (**) 1ph/3ph 1ph/3ph
Time of full Rise (sec) 45 45 
Max Load Per Arm (mm) 1021 1021 

 

 

 


Accessories available to order:

  • Set x 4 - 125mm Extension Adapters
  • Set x 4 – Chassis Frame Cradle Pads